Payments methode

Vandyvape Pulse 24 BF RDA Tank - 2.0ml

  • Free delivery! €20,- UK -EU
  • Ordered before 23:30? Tomorrow at home!
  • Ordered before 16:00 Sunday? Delivery on Monday!
  • Ordered before 12:00? The same day in the house for 4,95€.
gold
Matt black
Rainbow
Stainless Steel
€29,95
Availability: Out of stock
When in stock: Keep me informed

Vandyvape Pulse 24 BF RDA Tank - 2.0ml

Vandyvape Pulse 24 BF RDA Tank, is a unique RDA tank bottom with a diameter of 24,4mm for squonker devices. The Pulse RDA has a pre-installed squelker pen and also a 510 contact pin adapter so you can use the Pulse RDA as a dropper. It features a postless build deck for single-coil builds. The low profile design provides a simple and varied coil-builds. The unique design of the lateral airflow blows air directly onto your coil.

1. 24mm diameter with a liquid capacity of 2.0 ml
2. Unique leak-proof tubular direct airflow
3. With Ultem infusion point, available for SS, Black, Gold, Rainbow
4. Soil food directly to the side-shells
5. Universal 510-pin contact pin

What's with the Vandyvape Pulse 24 BF RDA Tank - 2.0ml?

1 x pulse 24 BF RDA
1 x 16 mm Delrin Drip Tip
1 x bag for accessories

What features does the Vandyvape Pulse 24 BF RDA Tank - 2.0ml have?

User manual:
Adjustable air flow: side
Fill liquid: bottom
Coil Rebuildable: Yes
Recommended battery: Xomo GT Laser 255S, Vandy Vape Pulse Mod, VOOPOO Drag Mod Resin, etc.

Physical parameter:
Capacity: 2.0 ml
Length: 23 mm
Diameter: 24.4 mm
Resistance: DIY
Weight: 100 g
Threading connection: 510

What is an RDA Dripper?

RDA stands for Rebuildable Dripping Atomizer. An RBA is, simply put, a tank without a reservoir. The deck contains 2 or more connections to attach your coil wire and cotton. Over there you place the cap, which is often a screw or sliding system. So there is no tank to put liquid in, but a system where you can drip directly onto the cotton "wick" e-liquid, after which you can take a few tips. The idea behind dripping "dripping" is that the taste experience is more intense and pure.


What else do I need for this RDA dripper to be able to smoke?

1. coil Wire
There are different types of coil wires, so these are available in Nickel, Kanthal A1, Titanium, stainless steel / SS wire etc. Look here around what suits you best. This thread is important to allow the liquid absorbed by the cotton to evaporate.

2. Cotton "Wicks"
Wick are available in different types of fabrics, the most common is cotton, they are also available in Silica, Organic Cotton Pads, Rayon Cotton, Bamboo and Mesh. If you have made a coil from the coiled wire, insert a wick. click here for wicks, Cotton

3. Tools to make this coil.
To make a coil with a wick "piece of fabric" you need tools, you can let a coil of the coiled wire run manually or automatically, there are already twisted coils. here you will find all the tools

4. a MOD
If the RDA dripper is assembled, you will need a MOD, every mod with a 510 connection can be used with these Drippers, look here for an ideal MOD. Every mod is basically the same, the only difference is the operation, Wattage and Modussen.
0 stars based on 0 reviews

Get notified when this product is back in stock

Receive an automatic email when this product is back in stock.

Fill in your email below: